The passenger footboards can be raised or lowered and angled for passenger comfort.
Height Adjustment
NOTE
See Figure 1. If the bracket does not slide up or down, loosen but do not remove the lower shoulder bolt (4).
| 1. | Remove the upper bracket screw (1), and washer (2). | |
| 2. | Select one of the three height positions. NOTE If necessary, remove any plastic plugs in the frame mounting holes (3). | |
| 3. | Slide the bracket and footboard assembly to the selected mounting hole. | |
| 4. | Install the upper bracket screw and washer. Tighten to 48.8–56.9 N·m (36–42 ft-lbs). | |
| 5. | If loosened, tighten the lower shoulder screw. Tighten to 5.4–8.1 N·m (48–72 in-lbs). |
Angle Adjustment
| 1. | See Figure 1. Remove the end screw (5). | |
| 2. | Pull the footboard off the mount. | |
| 3. | Align the splines in the footboard to the mount splines (6) at your preferred angle. Press the footboard over the splines. | |
| 4. | Apply LOCTITE 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (blue). Install the screw. Tighten to 20.3–27.1 N·m (15–20 ft-lbs). |
| 1 | Screw |
| 2 | Washer |
| 3 | Mounting holes |
| 4 | Shoulder bolt |
| 5 | End screw |
| 6 | Splines |
Figure 1. Passenger Footboards: FLHTKL