Fork Mounted Fairing
| 1. | Adjust headlamp. a. See Figure 1. Grasp adjuster cover (2) and pull forward to release it from posts (3). b. Insert flat blade screwdriver in vertical adjuster screw (1). c. Refer to Service Procedures → Check Headlamp Alignment → Fork Mounted Fairing: Headlamp Alignment. Turn adjuster screw CW or CCW to move headlamp low beam pattern (5) up or down until top of light beam meets alignment line (4). | |
| 2. | Remove screwdriver. | |
| 3. | See Figure 1. Install adjuster cover. a. Align adjuster cover (2) with posts (3). b. Press cover firmly onto posts. |
| 1 | Vertical adjuster |
| 2 | Adjuster cover |
| 3 | Post (2) |
Figure 1. Headlamp Adjustment
Frame Mounted Fairing
| 1. | Adjust headlamp. a. See Figure 2 or Figure 3 Insert an appropriately sized Philips #2 screwdriver vertically, behind close-out panel. b. Refer to Service Procedures → Check Headlamp Alignment → Frame Mounted Fairing: Headlamp Alignment. Turn adjuster screw CW or CCW to move headlamp low beam pattern (5) up or down until top of light beam meets alignment line (4). c. Remove screwdriver. |
Figure 2. Headlamp Adjuster
| 1 | Fairing |
| 2 | Headlamp adjuster |
Figure 3. Headlamp Adjuster (view from under fairing)