FITMENT
Table 1. Note
ALL MODELS
Installation of handlebars and risers may require a change in clutch cables or lines, throttle cables, or brake lines for some models. All modular lower brake lines listed are based on stock front suspension. Harley-Davidson Motor Company cannot test and make specific fitment recommendations concerning every possible mirror and handlebar combination. Therefore, after installing new mirrors, handlebars, or control cables/lines and before operating the motorcycle, check to ensure that all controls are fully functional and that the mirrors provide the operator a clear view to the rear. Handlebar height is regulated in many areas. Check local laws before installation.
STREET®
Table 2. Street Non-ABS Models
Single Disk: One-piece Front Brake Lines
Stock OEM (Rubber) Finish
Diamond Black
Length
Banjo Fittings
STREET 500 & STREET 750 (2015-later)
41800325
-
43.2''
10mm x 46° upper
10mm x 95° lower
150° banjo twist
41800326
-
41.3''
10mm x 90° upper
10mm x 65° lower
150° banjo twist
Table 3. Street ABS Models
Dual Disc: One-Piece Front Brake Lines
Stock OEM (Rubber) Finish
Diamond Black
Length
Banjo Fittings
STREET (2017 - later ABS)
41800610
-
12.1" upper length
10mm x 46° upper
10mm x 95° lower
150° banjo twist
41800611
-
15.9" upper length
10mm x 46° upper
10mm x 95° lower
150° banjo twist
SPORTSTER®
Table 4. Sportster Non-ABS Models
Single Disk: One-piece Front Brake Lines
Diamondback™
Diamond Black
Length
Banjo Fittings
SPORTSTER (2004-2013 NON-ABS)
-
41800178
34.0"
10mm x 60°
10mm x 60°
90° twist
46934-06
-
38.0"
10mm x 0°
10mm x 60°
90° twist
46936-06
-
40.3"
10mm x 60°
10mm x 60°
90° twist
46930-06
46779-09
41.5"
10mm x 60°
10mm x 60°
90° twist
41800283
46720-09
46"
10mm x 0°
10mm x 60°
90° twist
Table 5. Sportster Non-ABS Models
Single Disk: One-piece Front Brake Lines
Stock OEM (Rubber) Finish
Diamond Black
Length
Banjo Fittings
SPORTSTER (2017-LATER NON-ABS)
41800670
-
740 mm (29.1")
10mm x 0°
10mm x 10°
90° twist
Table 6. Sportster ABS Models
Single Disk: One-piece Front Brake Lines
Stock OEM (Rubber) Finish
Diamond Black
Length
Banjo Fittings
SPORTSTER (2017-LATER ABS)
41800671
-
740 mm (29.1")
10mm x 49°
10mm x 10°
90° twist
DYNA®
Table 7. Dyna Non-ABS Models
Single Disk: One-piece Front Brake Lines
Diamond Black
Length
Banjo Fittings
DYNA (2006-later NON-ABS)
46740-09
46.3''
0.445 x 0°
0.385 x 78°
75° twist
SOFTAIL®
Table 8. Softail Non-ABS Models
Single Disk: One-piece Front Brake Lines
Diamondback
Diamond Black
Length
Banjo Fittings
SOFTAIL (2000-2017 NON-ABS)
-
46791-09
42.5''
0.450 x 0°
0.393 x 90°
90° twist
46942-06
48962-09
44.1''
0.445 x 90°
0.385 x 90°
90° twist
-
48970-09
45.0''
0.445 x 0°
0.385 x 90°
20° twist