FITMENT
Figure 1. SPORTSTER® - CLIP-ON HANDLEBARS FOR 49MM FORKS
Table 1. Note
ALL MODELS
Installation of handlebars and risers may require a change in clutch cables or lines, throttle cables, or brake lines for some models. All modular lower brake lines listed are based on stock front suspension. Harley-Davidson Motor Company cannot test and make specific fitment recommendations concerning every possible mirror and handlebar combination. Therefore, after installing new mirrors, handlebars, or control cables/lines and before operating the motorcycle, check to ensure that all controls are fully functional and that the mirrors provide the operator a clear view to the rear. Handlebar height is regulated in many areas. Check local laws before installation.
2016-later XL1200X
Table 2.
Fitment
OEM Style Finish
Diamondback™
Diamond Black
Clutch Cables
37200172
37200056B
37200008C
Throttle / Idle Cables
Not Available
56100147
56100139
Brake Line, NON ABS
41800670
Not Available
Not Available
Brake Line Assembly, ABS
41800671
Not Available
Not Available
Handlebar Clamp Plug Kit
55800672
55800672
55800672
Turn Signal Relocation Kit ('16 - later models)
67800557
67800557
67800557
Lock Nut
7725 (x2)
7725 (x2)
7725 (x2)
Washer
7155 (x2)
7155 (x2)
7155 (x2)
2018-later XL1200XS
Table 3.
Fitment
OEM Style Finish
Diamondback™
Diamond Black
Clutch Cables
37200172
37200056B
37200008C
Throttle / Idle Cables
Not Available
56100147
56100139
Brake Line, NON ABS
41800670
Not Available
Not Available
Brake Line Assembly, ABS
41800671
Not Available
Not Available
Handlebar Clamp Plug Kit
55800672
55800672
55800672
Turn Signal Relocation Kit ('16 - later models)
67800557
67800557
67800557
Lock Nut
7725 (x2)
7725 (x2)
7725 (x2)
Washer
7155 (x2)
7155 (x2)
7155 (x2)