Map features can be turned on, off or adjusted.
  1. Select Home > Setup > Navigation Setup > Appearance.
  2. POI icons: Check the POI items to be displayed on the map.
  3. 2D/3D map: Select 2D map (top-down view) or 3D map (orientation is angled behind the motorcycle).
  4. North up/heading up (2D view only): Displays the map with north toward top or rotates the map so the vehicle heading is always oriented upward in the map. 3D view is always shown in a heading up orientation.
  5. Auto zoom: When auto zoom is enabled, the navigation system will automatically zoom the map view as the vehicle is approaching predetermined locations. Upon passing the location, the navigation system will automatically zoom out to the rider's selected Near/Normal/Far zoom level. When disabled the map zoom level will remain fixed at the rider's last setting regardless of the current or approaching locations alone the route.
  6. Current street: Displays the current street along the top of the map.
  7. Next street: Displays the next turn at the bottom of the map.
  8. Lane guidance: Displays lane guidance arrows along the highlighted route. When a turn is required on a multi-lane highway, the map displays bright orange arrows to suggest the proper lanes. Graphical representations of signposts and junctions are displayed.
  9. Audio info: Displays the current audio source along the bottom of the map.
  10. Left and right data fields: Displays the left and right data fields.
  11. Speed and flow (traffic only): Displays traffic overlay colors on the map.
  12. Motorcycle icon: Changes the icon used for the current position.
NOTE
The current audio source can also be toggled on and off by pressing and holding the NAVIGATION switch on the faceplate.