Removal
- See Figure 1. Remove seat mounting screw (1) from top of rear fender.
- See Maintenance and Lubrication → Seats → Seat Tongue (typical). Push seat rearward to free tongue (2) at front of seat from slot or bracket in frame back.
- Remove seat.
Installation
| 1. | See Figure 1. Place seat on frame back. | |
| 2. | Slide seat toward front of motorcycle until the tongue (2) locks into the bracket or slot in the frame back. | |
| 3. | Push seat forward to center rear fender seat retention nut in hole of mounting bracket. | |
| 4. | Hand-tighten the seat mounting screw (1). | |
 WARNINGAfter installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070b) | ||
| 5. | Pull up on seat to verify that it is properly secured. |
| 1 | Mounting screw |
| 2 | Tongue |
Figure 1. Seat: FLS, FLSS