Trip

See Figure 1. The trip switch (1) activates the trip odometers. The trip switch also is used to scroll through the optional screens of the odometer display. With the ignition off, the trip switch can activate time or odometer displays. Refer to Table 1.

Horn

See Figure 1. The horn is operated by pressing the horn switch (2). The horn can be activated for up to 10 seconds at a time. If the horn switch is held for a longer period, the horn automatically deactivates. Refer to Table 1.

High Beam

See Figure 1. Press the high beam switch (3) to activate the high beam. The (blue) high beam indicator lamp is lit when the high beam is on. Refer to Table 1.

Low Beam/Flash to Pass

Low beam: See Figure 1. Press the bottom of the switch to (4) activate the low beam.

Flash to pass: When the low beam switch is on, press and release the flash to pass switch (4) to flash the high beam before passing another vehicle. The high beam indicator lamp in the speedometer face is illuminated as long as the flash to pass switch is pressed.

When in accessory, press the flash to pass switch to activate the headlamp. Refer to Table 1.

Left Turn Signal

Activate: See Figure 1. Press the left turn signal switch (5) to activate the left turn signal. Refer to Table 1.

Cancel: Press the left turn signal switch to cancel the left turn signal. For detailed operation, see Controls and Indicators → Turn Signal Switch Operation.

NOTE

Front turn signal lamps also function as running lamps. This feature may not be available in all markets.

1	Trip
2	Horn
3	High beam
4	Low beam/flash to pass
5	Left turn signal

Figure 1. Left Hand Switch Module (typical)

Table 1. Left-Hand Control Switches

SWITCH	NAME	FUNCTION
	Trip	Press the switch to alternate odometer displays.
	Horn	Press the switch to sound the horn.
	High beam	Press the switch to switch the headlamp to high beam.
	Low beam/ flash to pass	Press the switch to switch the headlamp to low beam. Press and release to flash the high beam. In ACC, press to activate the headlamp.
	Left turn	Press the switch to signal a left turn.

Cruise Control: FLSS, FLSTC, FLSTFBS, FLSTN

See Figure 2. The cruise control switch automatically controls the speed. Refer to Table 2. See Controls and Indicators → Cruise Control: FLSS, FLSTC, FLSTFBS, FLSTN.

Cruise: Press the cruise switch straight in to enable cruise control.The cruise control indicator lights orange. Pressing the switch again turns off cruise control.

SET/-: With cruise control enabled, press SET/- to set the cruising speed. The cruise control indicator lights green. While at cruising speed, press SET/- to decrease the regulated speed.

RES/+: If cruise control is disengaged (such as a braking event or rolling the throttle through the roll-off switch), press RES/+ to resume the previous cruising speed. While at cruising speed, press RES/+ to increase speed.

Figure 2. Cruise Control: FLSS, FLSTC, FLSTFBS, FLSTN

Table 2. Cruise Control Switch: FLSS, FLSTC, FLSTFBS, FLSTN

SWITCH	NAME	FUNCTION
	Cruise	Press the switch to turn on cruise.
	Set	Press the switch to set the cruise speed. Tap the switch down to decrease speed in increments.
	Resume	Press the switch to resume cruise. Tap the switch up to increase set speed in increments.