See Figure 1. Remove seat mounting screw (1) from top of rear fender.

See Maintenance and Lubrication → Seats → Seat Tongue (typical). Push seat rearward to free tongue (2) at front of seat from slot or bracket in frame back.

Remove seat.

See Figure 1. Place seat on frame back.

Slide seat toward front of motorcycle until the tongue (2) locks into the bracket or slot in the frame back.

Push seat forward to center rear fender seat retention nut in hole of mounting bracket.

Hand-tighten the seat mounting screw (1).

Pull up on seat to verify that it is properly secured.