1. See Figure 1. Loosen horizontal adjustment screw (2). Adjust headlamp horizontally to direct light beam straight ahead.
2. Tighten horizontal adjustment screw to 40.7–47.5 N·m (30–35 ft-lbs).
3. Loosen vertical adjustment screw (1). Adjust headlamp vertically until beam centers on horizontal line.
4. Tighten vertical adjustment screw (1) to:
a. FXSB: 33.9–40.7 N·m (25–30 ft-lbs).
b. All except FXSB: 47.5–61 N·m (35–45 ft-lbs).
1Vertical adjusting screw
2Horizontal adjusting screw
Figure 1. Headlamp Adjustment (typical)