See Figure 1. Vehicles with a Bluetooth audio system are equipped with speakers.
WARNING
Set volume levels and other controls on audio and electronic devices before riding. Distractions can lead to loss of control, resulting in death or serious injury. (00088b)
WARNING
Do not select a volume level that blocks out traffic noise or interrupts the concentration necessary for safe operation of the motorcycle. Distractions or a volume level that blocks out traffic noise could cause loss of control resulting in death or serious injury. (00539b)
See personal electronic device info to pair to vehicle.
Some vehicles have a Bluetooth audio system. The system operates while the ignition switch is in the IGNITION or ACCESSORY position.
Pairing a Bluetooth Device
Multiple devices can be paired with the audio system. However, the audio system only maintains an active Bluetooth connection with one device at a time.
The audio system will display as "HD-Audio".
Refer to your Bluetooth-compatible device owners manual to ensure Bluetooth is enabled.
Connecting a Bluetooth Device
Once you have paired your Bluetooth-compatible device it can now be connected for media playback.
The audio system will automatically try to connect with the media device after pairing is complete. For some devices, a setting is required within the device before it will automatically connect. Refer to your Bluetooth-compatible device owners manual to confirm Bluetooth settings.
Reconnecting After Vehicle Turns On
The next time the motorcycle is turned on, the audio system will automatically try to establish a Bluetooth connection with the Bluetooth device from the last vehicle shutdown.
Allow a few moments for the audio system to initialize and the Bluetooth device to connect.
If the audio system will not automatically reconnect with media devices over Bluetooth, refer to Pairing a Bluetooth Device and Connecting a Bluetooth Device in this section.
For additional functions, install Harley-Davidson Audio app on personal device. Additional functions include: 7 band equalizer, update audio system firmware, enable or disable automatic volume control.
PIN Reset
With vehicle off, disable Bluetooth on any nearby devices that were connected to the audio system.
Enable Bluetooth on mobile device.
Cycle the OFF/RUN switch to RUN. Enter new PIN in the Harley-Davidson Audio app.
Figure 1. Audio System Speakers