WARNINGBe sure to check capacity rating and condition of hoists, slings, chains and cables before use. Exceeding capacity ratings or using lifting devices that are in poor condition can lead to an accident, which could result in death or serious injury. (00466c)
Setting Motorcycle Upright
- Place motorcycle upright on a level surface or suitable lift, if available.
- Verify that the motorcycle is level.
- Secure with tie-downs.
Lifting Motorcycle
NOTE
- See Figure 1. When lifting motorcycle from underneath, always lift directly below crankshaft centerline with wood between motorcycle and lift.
- Always support a motorcycle that is being serviced with blocks or stands.
| 1. | Remove skid plate. See Service Procedures → Skid Plate. | |
| 2. | Place jack with block of wood below crankshaft centerline. | |
| 3. | Raise motorcycle to allow servicing. |
Figure 1. Crankshaft Centerline