Removal
| 1. | See Figure 1. Insert key in seat lock (2). | |
| 2. | Turn key to release latch (4). | |
| 3. | Lift up then back on passenger seat (3) to remove. | |
| 4. | Lift up then back on rear of rider seat (1) to remove. |
Installation
NOTE
Rider seat may be installed in either high position or low position slots to adjust seat height.
| 1. | See Figure 2. Insert tabs (3) of rider seat (1) into high position (4) or low position (5) slots in side covers (2). | |
| 2. | Lower rear of rider seat (1) into position. | |
| 3. | See Figure 1. Engage tabs on passenger seat (3) in slots of seat support. | |
| 4. | Lower rear of passenger seat. | |
| 5. | Press rear of passenger seat down until a click is heard. | |
| 6. | Pull up on the seat to verify it is secure. |
| 1 | Rider seat |
| 2 | Seat lock |
| 3 | Passenger seat |
| 4 | Latch |
Figure 1. Passenger Seat
| 1 | Rider seat |
| 2 | Side cover (2) |
| 3 | Tab (2) |
| 4 | High position |
| 5 | Low position |
Figure 2. Rider Seat (Two-piece)