Ride Modes

Refer to Table 1. The ride mode icon displays the currently selected ride mode. The selected ride mode can be changed using the mode button on the Right Hand Control Module (RHCM). Refer to Operation → Right Hand Control Switches.

NOTE

If a fault is detected, a ride mode fault icon will be shown in place of the ride mode icon.

Ride Mode Fault: Displays when system fault is detected by vehicle. When fault is detected, cycle ignition.
1. With security fob present, set the OFF/RUN switch to OFF.
2. Wait 45 seconds.
3. Set the OFF/RUN switch to ON.

If cycling ignition system does noes not eliminate fault, see a Harley-Davidson dealer for service.

Road: Delivers balanced performance with an intuitive blend of technology for daily use, with Anti-lock Braking System (ABS) and Traction Control System (TCS) intervention that offers peace of mind. On models with enhanced semi-active suspension, this mode will also adjust suspension damping to a balanced setting with increased comfort over Sport.
Rain: This mode offers restrained acceleration and limited engine braking with higher levels of ABS and traction control intervention to give the rider greater confidence when riding in the rain or when traction is otherwise limited. The Rain Mode is also an appropriate setting for riders to build confidence as they become familiar with the motorcycle. On models with enhanced semi-active suspension, this mode will also adjust suspension damping to a compliant comfort setting.
Sport: Delivers the full performance potential of the motorcycle in a direct and precise manner, with full power and the quickest throttle response on tap. Traction control is set to its lowest level of intervention intended/appropriate for on-road use, and engine braking is increased. Sport Mode maximizes the rider connection to the motorcycle for a direct and visceral performance riding experience. On models with enhanced semi-active suspension, this mode will also adjust suspension damping to a sport setting with higher damping rates and minimal float.
Off-Road: Midrange level of power with torque characteristics tailored for use in an off-road environment. Antilock braking is active on both wheels, with interventions designed specifically for loose unpaved surfaces. Traction control intervention is at the same level as sport mode. On models with enhanced semi-active suspension, this mode will also adjust suspension damping to an off-road use targeted setting with increased initial damping.
Off-Road Plus: Same engine performance as Off-Road mode, with key changes to ABS and TCS that best support use in off-road environments by an experienced rider. Rear wheel ABS is disabled, front to rear electronically linked braking function is disabled, and drag-torque slip control is disabled. The TCS provides the least intervention available. Front wheel lift mitigation and rear wheel lift mitigation are also disabled. Cornering enhancements to TCS, and front wheel ABS are disabled, these systems will be at their lowest level of intervention regardless of motorcycle lean angle. This mode should only be used by experienced riders in an off-road environment with a properly equipped vehicle. On models with enhanced semi-active suspension, this ride mode will also change suspension damping to have less initial damping.

NOTE

To enter Off-Road Plus ride mode, enter Off-Road ride mode, then hold down the "MODE" button until Off-Road Plus icon appears.

Custom Modes A, B and Custom Off-Road: Custom Modes allow the rider to select their own preference of engine torque delivery characteristics, engine braking, Throttle Response, TCS, ABS, and Suspension damping levels within specific ranges. Vehicles with the Adaptive Ride Height (ARH) option have the ability to adjust the timing of when the system will automatically lower or to keep it at ride height.
Custom Off-Road Plus Mode:Meant for use in an off-road environment by an experienced rider. Uses same performance settings chosen for Custom Off-Road mode, except the ABS and traction control settings will match the pre-programmed Off-Road Plus mode to best support use in an off-road environment by an experienced rider. ABS function on the rear wheel is disabled, front to rear electronically linked braking function is disabled, and drag-torque slip control is disabled. The traction control system changes to the least intervention available. Front wheel lift mitigation and rear wheel lift mitigation are also disabled. Cornering enhancements to traction control, and front wheel antilock braking are disabled, meaning these systems will be at their lowest level of intervention regardless of motorcycle lean angle. On special models, the suspension setting selected in custom off-road ride mode will carry over into this ride mode.

NOTE

Custom Off-Road ride mode must be configured before Custom Off-Road Plus mode can be used.
Off-Road modes are only available on the RA1250S.
To enter Custom Off-Road Plus ride mode, enter Custom Off-Road ride mode, then hold down the "MODE" button until Custom Off-Road Plus icon appears.

Table 1. Ride Modes

ICON	Ride Mode
	Road
	Rain
	Sport
	Off-Road
	Off-Road Plus
⁽¹⁾	Custom Off-Road
⁽¹⁾	Custom Off-Road Plus
	Custom A
⁽¹⁾	Custom B
	Ride mode fault

(1) Not available on all models

Setting Custom Ride Mode

Custom ride modes must be set up before they can be used. To set up a custom ride mode navigate to Ride Modes menu. Settings> Ride Customization> Ride Modes. Select custom ride mode to be set up. Settings from an existing ride mode can be copied and used as a starting point when setting up a custom ride mode. Refer to Table 2 for available selections.

Table 2. Custom Ride Mode Settings

Selection	Result
Engine Map	Sets overall power delivery characteristics in the custom ride mode. Selection will copy engine map characteristics from one of the pre set ride modes.
Engine Braking	Adjusts how much engine braking will be enabled in the custom ride mode.
Throttle Response	Adjusts the intensity of throttle response felt by the rider in the custom ride mode.
Traction Control	The traction control level adjusts how much rear wheel slip and front wheel lift mitigation the system will allow. Selection will copy traction control characteristics from one of the pre set ride modes.
Anti-Lock Braking	Adjusts how much rear wheel lift mitigation and ABS intervention is present within ride mode. Selection will copy ABS characteristics from one of the pre set ride modes.
Suspension Damping⁽¹⁾	Adjusts suspension damping to the desired level.
Adaptive Ride Height⁽²⁾	Adjust the timing of when the ARH system will automatically lower or to keep it at ride height.

(1) Available on vehicles equipped with electronic suspension.

(2) Available on vehicles equipped with ARH.