Clutch Hand Lever

WARNING

Do not position fingers between hand control lever and handlebar grip. Improper hand positioning can impair control lever operation and cause loss of vehicle control, which could result in death or serious injury. (00032a)

See Your Motorcycle → Primary Controls and Service Components → Controls and Service Components (FLHTCUTG Models), Your Motorcycle → Primary Controls and Service Components → Controls and Service Components (FLTRT Road Glide 3 Models) or Your Motorcycle → Primary Controls and Service Components → Controls and Service Components (FLRT). The clutch hand lever is operated with the fingers of the left hand. See Operation → Shifting Gears.

Gear Shift Lever

See Figure 1. The gear shift lever is operated with the left foot. Neutral is found between first and second gear in the six speed shift pattern. See Operation → Shifting Gears.

Figure 1. Gear Shift Lever and Shift Pattern

Left-Hand Control Module

See Your Motorcycle → Primary Controls and Service Components → Controls and Service Components (FLHTCUTG Models), Your Motorcycle → Primary Controls and Service Components → Controls and Service Components (FLTRT Road Glide 3 Models) or Your Motorcycle → Primary Controls and Service Components → Controls and Service Components (FLRT). Operate the switches on the left hand control module with the thumb of the left hand. See Operation → Left Hand Control Switches.

Speedometer/Odometer

See Your Motorcycle → Primary Controls and Service Components → Controls and Service Components (FLHTCUTG Models), Your Motorcycle → Primary Controls and Service Components → Controls and Service Components (FLTRT Road Glide 3 Models) or Your Motorcycle → Primary Controls and Service Components → Controls and Service Components (FLRT). The current road speed is displayed in the speedometer. The accumulated mileage and individual trip mileage is displayed in the odometer window in the face of the speedometer. See Operation → Instruments.

Right-Hand Control Module

See Your Motorcycle → Primary Controls and Service Components → Controls and Service Components (FLHTCUTG Models), Your Motorcycle → Primary Controls and Service Components → Controls and Service Components (FLTRT Road Glide 3 Models) or Your Motorcycle → Primary Controls and Service Components → Controls and Service Components (FLRT). Operate the switches on the right hand control module with the thumb of the right hand. See Operation → Right Hand Control Switches.

Brakes

WARNING

Do not position fingers between hand control lever and handlebar grip. Improper hand positioning can impair control lever operation and cause loss of vehicle control, which could result in death or serious injury. (00032a)

Front brake lever: See Your Motorcycle → Primary Controls and Service Components → Controls and Service Components (FLHTCUTG Models), Your Motorcycle → Primary Controls and Service Components → Controls and Service Components (FLTRT Road Glide 3 Models) or Your Motorcycle → Primary Controls and Service Components → Controls and Service Components (FLRT). The front brake lever controls the front brake. Operate the hand lever with the fingers of the right hand.

Rear brake pedal: See Your Motorcycle → Primary Controls and Service Components → Controls and Service Components (typical). The rear brake pedal activates the rear wheel brake.

Apply brakes evenly to prevent wheels from locking up. A balance between rear and front brake is best.

Throttle Twist Grip

Accelerate: See Your Motorcycle → Primary Controls and Service Components → Controls and Service Components (FLHTCUTG Models), Your Motorcycle → Primary Controls and Service Components → Controls and Service Components (FLTRT Road Glide 3 Models) or Your Motorcycle → Primary Controls and Service Components → Controls and Service Components (FLRT). Slowly twist throttle twist grip backward (toward rear of motorcycle) to open the throttle.

Decelerate: Slowly twist throttle control grip forward (toward the front) to close the throttle.

OFF/RUN Switch

NOTE

The headlamp and tail lamps operate when the switch is in the RUN position.

See Operation → Right Hand Control Switches → Right Hand Switch Module. To start the engine, see Operation → Starting the Engine.