Ride Modes

Refer to Table 1. The ride mode icon displays the currently selected ride mode. The selected ride mode can be changed using the mode button on the Right Hand Control Module (RHCM). Refer to Operation → Right Hand Control Switches.

NOTE

If a fault is detected, a ride mode fault icon will be shown in place of the ride mode icon.

Road: Delivers balanced performance with an intuitive blend of technology for daily use, with Anti-lock Braking System (ABS) and Traction Control System (TCS) intervention that offers peace of mind.
Rain: This mode offers restrained acceleration and limited engine braking with higher levels of ABS and traction control intervention to give the rider greater confidence when riding in the rain or when traction is otherwise limited. The Rain Mode is also an appropriate setting for riders to build confidence as they become familiar with the motorcycle.
Sport: Delivers the full performance potential of the motorcycle in a direct and precise manner, with full power and the quickest throttle response on tap. Traction control is set to its lowest level of intervention intended/appropriate for on-road use, and engine braking is increased. Sport Mode maximizes the rider connection to the motorcycle for a direct and visceral performance riding experience.
Custom Modes A and B: Custom Modes allow the rider to select their own preference of engine torque delivery characteristics, engine braking, Throttle Response, TCS, ABS, and Suspension damping levels within specific ranges.

Table 1. Ride Modes

ICON	Ride Mode
	Road
	Rain
	Sport
	Custom A
	Custom B
	Ride mode fault

Setting Custom Ride Mode

Custom ride modes must be set up before they can be used. To set up a custom ride mode navigate to Ride Modes menu. Settings> Ride Customization> Ride Modes. Select custom ride mode to be set up. Settings from an existing ride mode can be copied and used as a starting point when setting up a custom ride mode. Refer to Table 2 for available selections.

Table 2. Custom Ride Mode Settings

Selection	Result
Engine Map	Sets overall power delivery characteristics in the custom ride mode. Selection will copy engine map characteristics from one of the pre set ride modes.
Engine Braking	Adjusts how much engine braking will be enabled in the custom ride mode.
Throttle Response	Adjusts the intensity of throttle response felt by the rider in the custom ride mode.
Traction Control	The traction control level adjusts how much rear wheel slip and front wheel lift mitigation the system will allow. Selection will copy traction control characteristics from one of the pre set ride modes.
Anti-Lock Braking	Adjusts how much rear wheel lift mitigation and ABS intervention is present within ride mode. Selection will copy ABS characteristics from one of the pre set ride modes.