NOTE
- Driving lamps not available in all markets.
- Fog lamps only available while headlamp low beam is active in some markets.
The driving/fog lamps provide additional light to the road and surrounding environment in dark or rainy conditions. The lamps also give the motorcycle more visibility to other motorists.
See Figure 1. The driving lamps (1) and fog lamps (2) are located in the same housing.
The driving lamps and fog lamps can be disabled and re-enabled by the rider through the settings menu of the Instrument Module (IM). Settings> Ride Customization.
| 1 | Driving lamps (where available) |
| 2 | Fog lamps |
Figure 1. Driving/Fog Lamps
Fog Lamps
Refer to Operation → Left Hand Control Switches → LHCM - Bottom. With low beam active, press and hold the navigate up (2) until fog light control appears on IM. Release button and press again to switch between on and off. Press OK/enter (9) to exit menu.
Refer to Operation → Indicators → Instrument Module Indicators. When the fog lamps are on, the fog lamps (25) indicator is displayed on the IM.
Driving Lamps (if equipped)
The driving lamps are configured to turn on when the headlamp high beam is activated.