SAFETY

Follow all warnings, cautions and safety tips in this Owner's manual.

WARNING

Set volume levels and other controls on audio and electronic devices before riding. Distractions can lead to loss of control, resulting in death or serious injury. (00088b)

WARNING

Do not select a volume level that blocks out traffic noise or interrupts the concentration necessary for safe operation of the motorcycle. Distractions or a volume level that blocks out traffic noise could cause loss of control resulting in death or serious injury. (00539b)

NOTICE

There are no serviceable parts inside the unit; leave all servicing to qualified service personnel. Disassembly of the unit could result in equipment damage and/or equipment malfunction. (00172a)

NOTE

To make full use of features and minimize distraction while on the road, configure the system with your personal preferences before riding.

CONTROLS

Instrument Module (IM)

See Figure 1. To access the menu selections on the Instrument Module (IM) press the menu button on the Left Hand Control Module (LHCM). Refer to Operation → Left Hand Control Switches.

1	Home
2	Navigation
3	Audio
4	Bike Status
5	Settings

Figure 1. Menu Selections

Hand Controls

See Operation → Left Hand Control Switches → LHCM - Bottom and Operation → Right Hand Control Switches → RHCM - Bottom.

BLUETOOTH

Pairing Device

1.	Activate Bluetooth on your device.
2.	See Figure 1. Select: settings menu (5).
3.	Select: Bluetooth
4.	Select: Add new device. a. Phone:Select: Add New Phone b. Headset:Select: Add New Headset
5.	Follow on screen prompts to complete pairing.

Audio

NOTE

A phone and headset must be paired to the IM before audio functions can be used.

See Figure 1. To access audio functions Select: audio card (3).

Use the Right Hand Control Module (RHCM) to control audio functions. Refer to Operation → Right Hand Control Switches.

PHONE

NOTE

A phone must first be paired before call or text notifications can be viewed through the IM.
A headset with microphone is required to make and receive calls via Bluetooth.

Notifications

Call and text notifications can be turned on or off through the settings menu.

1.	See Figure 1. Select: settings menu (5).
2.	Select: Phone Notifications.
3.	Adjust notification settings.

Making a Call

Refer to Operation → Right Hand Control Switches → RHCM - Bottom. Voice recognition can be used to place a call through the IM.

Receiving a Call

See Figure 2. When receiving a call a notification will be displayed on the IM.

Use the LHCM to answer or decline the call.

1	Answer call
2	Decline call

Figure 2. Incoming Call

VOICE RECOGNITION

NOTE

Refer to Operation → Right Hand Control Switches → RHCM - Bottom. The voice recognition switch (6) activates voice recognition features on a connected device (if supported). With a headset connected, press the voice recognition switch. Speak the desired command into the headset microphone.

NAVIGATION

NOTE

A device using the H-D Mobile App must be paired to the IM before navigation functions can be used.

The navigation function is intended to assist you when traveling. In some circumstances, information provided by the navigation function may be incomplete, incorrect or outdated. Road conditions, traffic laws and restrictions (such as no left turns, street closures, one way streets, road construction detours, and so on) can frequently change. Before following any instruction, check that the instruction can be done safely and legally. Program and review navigation routes with the vehicle stopped. If necessary, safely park the vehicle if there is difficulty following the route guidance or to program a new route.

Navigation Displays

Moving Maps

1	Cancel route
2	Zoom out
3	Trip information toggle
4	Zoom in
5	Trip information

Figure 3. Moving Maps

Setting Route

The navigation function requires information that has been entered into the connected device using the H-D Mobile App. For more information see www.harley-davidson.com.

Bike Status

Selecting the bike status card (4) displays vehicle information including, Tire Pressure Monitoring System (TPMS) data, engine coolant temperature, and battery voltage.