| 1. | See Chassis → REAR BRAKE MASTER CYLINDER → Assemble → Master Cylinder Assembly. Remove dust boot (10). | |
| 2. | Remove return spring. a. Push and hold flat washer (8). b. Remove E-clip (9). c. Release return spring (7) tension and remove return spring. | |
| 3. | Remove pushrod. a. Push and hold end of pushrod (4). b. Discard retaining ring (6). c. Remove pushrod with special washer (5). | |
| 4. | Pull piston assembly from piston bore. | |
| 5. | Discard spigot (1). |