1. See Figure 1. Install handlebar.
a. Install handlebar (3).
b. Install handlebar clamp with Instrument Module (IM).
c. Install handlebar clamp screws (1) loosely.
d. Install stop screw (2). Hand tighten until bolt head is seated.
e. Rotate handlebar into positon.
f. Secure rear handlebar clamp screws first than front handlebar clamp screws. Tighten.
Torque: 20–24 N·m (15–18 ft-lbs) Handlebar Clamp Screw
2. See Figure 3. Install new cable strap (2).
3. See Figure 2. Install connectors.
a. Control module (1)
b. Headlamp (2)
c. Fork lock (3)
d. Front turn signals (4)
e. TGS (5)
4. See Figure 3. Install new anchored cable strap (1).
1Handlebar Clamp Screw (4)
2Stop Screw
3Handlebar
Figure 1. Handlebar Removed
1Front hand control modules
2Headlamp
3Fork lock
4Front turn signals
5Twist Grip Sensor (TGS)
Figure 2. Connectors
1Anchored cable strap
2Cable strap
Figure 3. Cable Straps