1.	See Figure 2. Install new o-ring (3) to breather fitting (1).
2.	NOTE Lube O-ring before installation. See Figure 1. Install breather fitting (4).
3.	Install screw (5). Tighten. Torque: 5–7 N·m (44–62 in-lbs) Breather fitting screw
4.	Install breather hose. a. Install hose (6) to fitting (4). NOTE See Figure 2. Align line on vent hose with alignment mark (2) on fitting. b. Position clamp (3) to secure hose. c. Secure P-clamp (7) to anti-rotation boss (1). d. Install screw (2). Tighten. Torque: 5–7 N·m (44–62 in-lbs) Breather hose P-clamp screw
5.	Install breather (8).

1	Anti-rotation boss
2	P-clamp screw
3	Hose clamp
4	Breather fitting
5	Screw
6	Hose
7	P-clamp
8	Breather

Figure 1. Breather Assembly

1	Breather fitting
2	Alignment mark
3	O-ring

Figure 2. Breather Fitting