| 1. | See Figure 1. Position turn signal (1) in removed position (6). | |
| 2. | Install alignment screw (4). Tighten finger tight. | |
| 3. | Install screws (5). Tighten. Torque: 8–10 N·m (71–89 in-lbs) Turn signal, rear, screw | |
| 4. | Tighten alignment screw. Torque: 1.8–2.2 N·m (16–19 in-lbs) Turn signal, rear, alignment screw | |
| 5. | Connect turn signal connector (2). |
| 1 | Turn signal |
| 2 | Turn signal connector |
| 3 | Turn signal connector lock |
| 4 | Alignment screw |
| 5 | Screw (2) |
| 6 | Positioning points (3) |
Figure 1. Rear Turn Signal (Right Shown, Left Similar)