1.	Figure 2 Connect WSS connector (1).
2.	Route WSS wire (2) as shown.
3.	Install WSS wire into wire retainer (5).
4.	Figure 1 Route WSS wire under rear fork.
5.	Install new anchored cable straps (2) to rear fork.
6.	Secure WSS wire into anchored cable straps (2).

1	WSS Wire
2	Cable Strap

Figure 1. WSS Routing on Rear Fork

1	Wheel Speed Sensor (WSS) connector
2	WSS wire
3	Frame
4	Rear fork
5	Wire retainer

Figure 2. Rear WSS Wire/Connector