Special Tools
DescriptionPart NumberQty.
FAT JACK
HD-45968
1
EVPT STAND
HD-52734-1
1
LIFTING STRAPS
HD-52734-2
1

WARNING
Be sure to check capacity rating and condition of hoists, slings, chains and cables before use. Exceeding capacity ratings or using lifting devices that are in poor condition can lead to an accident, which could result in death or serious injury. (00466c)
Always use blocking or proper stands to support motorcycle.
Set Motorcycle
1. Place motorcycle upright on a level surface or suitable lift if available.
2. Verify that motorcycle is level.
3. Secure with tie-downs.
Raise Front or Rear Wheel for Service (if needed)
1. Verify that motorcycle is level.
2. Use a fat jack or similar and the Electric Vehicle Powertrain (EVPT) stand to raise the motorcycle to service a front or rear wheel. See Jack Points.

Special Tool: FAT JACK (HD-45968)

Special Tool: EVPT STAND (HD-52734-1)

3. Secure with lifting straps.

Special Tool: LIFTING STRAPS (HD-52734-2)

Jack Points
1. Use jack points on skid plate (1).
a. Front jack point area (2).
b. Rear jack point area (3).
1Skid Plate
2Front jack point area
3Rear jack point area
Figure 1. Jack Points