| 1. | Connect coolant hoses. See Cooling System → COOLANT HOSES. | |
| 2. | See Figure 1. Install charger (2). | |
| 3. | Install screws (1). Tighten. Torque: 6–8 N·m (53–71 in-lbs) Battery charger screws | |
| 4. | Connect connectors (3, 5, 6). | |
| 5. | Install new cable strap (4) and secure wire harness. |
| 1 | Screw (4) |
| 2 | OBC |
| 3 | RESS connector |
| 4 | Cable strap |
| 5 | OBC connector |
| 6 | OBC to AC filter connector |
Figure 1. On Board Charger (OBC)