Cord Caddy

1.	See Figure 2. Align cord caddy alignment pins (1) and subframe alignment pins (2).
2.	See Figure 1. Install cord caddy (4).
3.	Tighten right crossmember screws (5 and 8). Torque: 5–6.5 N·m (44–58 in-lbs) Front crossmember screws
4.	Aligned seat with cord caddy.
5.	Install washer (3), spring (2) and pivot pin (1).
6.	Install clip (9).
7.	Install vehicle inlet plug (6).
8.	Lower seat.
9.	Install tail section. See Install in this section.

Latch Assembly

1.	See Figure 3. Install cable end (6) to lock lever (5).
2.	Install cable to mounting bracket (3).
3.	Install latch and cable assembly (2).
4.	Install latch screws (4). Tighten. Torque: 4–6 N·m (35–53 in-lbs) Seat latch screws
5.	Install seat latch guard (1).
6.	Install tail section. See install in this section.

Lock

1.	See Figure 5. Install latch plate (3) and screws (2). Tighten. Torque: 2–4 N·m (18–35 in-lbs) Latch plate screws
2.	Install seat lock (4).
3.	Install lock screws (5). Tighten. Torque: 0.7–1.1 N·m (6–10 in-lbs) Lock screws
4.	See Figure 3. Connect cable end (6) to lock lever (5).
5.	Attach cable to mounting bracket (3).
6.	Install tail section. See Install in this section.

Seat

1.	See Figure 7. Install cosmetic cover (10).
2.	Install screws (6). Tighten Torque: 4–8 N·m (35.4–70.8 in-lbs) Cosmetic cover screw
3.	Install rear crossmember (11) to seat (1).
4.	Position seat between subframes
5.	Align flat spots on rear crossmember with flat spots on subframes.
6.	Install screws (9). Tighten. Torque: 5–6.5 N·m (44–58 in-lbs) Rear crossmember screws
7.	Tighten front crossmember screws (7). Torque: 5–6.5 N·m (44–58 in-lbs) Seat subframe screws
8.	See Figure 1. Aligned seat with cord caddy (4).
9.	Install washer (8), compression spring (9) and pivot pin (7).
10.	Install E-clip (10).
11.	Lower seat.
12.	Install tail section. See Install in this section.

Seat Bracket Assembly

1.	See Figure 7.. Install pin (3) and e-clip (2) to seat bracket (13).
2.	Install seat bracket.
3.	Install screws (4). Tighten. Torque: 4–8.1 N·m (35–72 in-lbs) Seat bracket screws
4.	Lower seat.

1	Pivot pin
2	Spring
3	Washer
4	Cord caddy
5	Front crossmember screw
6	Inlet plug
7	Right subframe
8	Rear crossmember screw
9	Clip

Figure 1. Cord Caddy

1	Cord caddy alignment pin
2	Subframe alignment pin

Figure 2. Cord Caddy Alignment Pins

1	Seat guard
2	Latch and cable assembly
3	Mounting bracket
4	Screw (2)
5	Lock lever
6	Cable end
7	Front crossmember

Figure 3. Seat Latch

1	Rear crossmember screw
2	Left subframe
3	Front crossmember screw

Figure 4. Seat Lock

1	Left subframe
2	Screw (2)
3	Latch plate
4	Seat lock
5	Screw (2)

Figure 5. Seat Lock Assembly

1	Alignment pins
2	Alignment holes
3	Front crossmember

Figure 6. Front Crossmember Alignment Pins

1	Seat
2	Clip
3	Pin
4	Screw (3)
5	Screw (2)
6	Screw (2)
7	Front crossmember screw (2)
8	Cord caddy
9	Rear crossmember screw (2)
10	Seat cosmetic cover
11	Rear crossmember
12	Grab strap
13	Seat bracket

Figure 7. Seat Assembly