| FASTENER | TORQUE VALUE | NOTES |
|---|---|---|
|
20–24 N·m (15–18 ft-lbs) | 7.7 INSTRUMENT MODULE (IM), Remove and Install: Round | |
|
1.4–1.9 N·m (12–17 in-lbs) | 7.7 INSTRUMENT MODULE (IM), Remove and Install: Round | |
|
12–14 N·m (9–10 ft-lbs) | 7.7 INSTRUMENT MODULE (IM), Remove and Install: Round | |
| ABS module bracket screws |
6–8 N·m (53–71 in-lbs) | 7.27 INERTIAL MEASUREMENT UNIT (IMU), Install |
| BCM caddy screw |
5–7 N·m (44–62 in-lbs) | 7.30 BCM CADDY, Install |
| Battery box cover screw |
5–7 N·m (44–62 in-lbs) | 7.22 SECURITY SIREN, Install |
| Battery box screws |
8–10 N·m (71–89 in-lbs) | 7.31 BATTERY BOX, Install |
| Brake, rear stop lamp switch |
16.3–20.3 N·m (12–15 ft-lbs) | 7.13 REAR STOPLAMP SWITCH, Install |
| GND screw |
5–7 N·m (44–62 in-lbs) | 7.34 MAIN WIRE HARNESS, Install |
| Headlamp bracket screws |
8–10 N·m (71–89 in-lbs) | 7.9 HEADLAMP, Install |
| Headlamp screw |
8–10 N·m (71–89 in-lbs) | 7.9 HEADLAMP, Install |
| Headlamp screw |
8–10 N·m (71–89 in-lbs) | 7.9 HEADLAMP, Adjust |
| Horn screws |
5–7 N·m (44–62 in-lbs) | 7.8 HORN, Install |
| IMU screws |
5–7 N·m (44–62 in-lbs) | 7.27 INERTIAL MEASUREMENT UNIT (IMU), Install |
| JSS screw |
2.2–2.8 N·m (19–25 in-lbs) | 7.28 JIFFY STAND SENSOR (JSS), Install |
| License plate lamp connector cover screws |
1.8–2.2 N·m (16–19 in-lbs) | 7.14 LICENSE PLATE LAMP, Install |
| License plate lamp screws |
1–1.4 N·m (9–12 in-lbs) | 7.14 LICENSE PLATE LAMP, Install |
| Switch housing (RHCM) screws |
4–5 N·m (35–44 in-lbs) | 7.6 RIGHT HAND CONTROL MODULE (RHCM), Install |
| Switch housing (LHCM) screws. |
4–5 N·m (35–44 in-lbs) | 7.5 LEFT HAND CONTROL MODULE (LHCM), Install |
| TCU to bracket screws |
4.5–5.5 N·m (40–49 in-lbs) | 7.18 TELEMETRY CONTROL UNIT (TCU), Remove and Install: TCU |
| Tail lamp screw |
8–10 N·m (71–89 in-lbs) | 7.12 TAIL LAMP, Install |
| Turn signal, front, screw |
8–10 N·m (71–89 in-lbs) | 7.10 FRONT TURN SIGNAL LAMPS, Install |
| Turn signal, rear, alignment screw |
1.8–2.2 N·m (16–19 in-lbs) | 7.11 REAR TURN SIGNAL LAMPS, Install |
| Turn signal, rear, screw |
8–10 N·m (71–89 in-lbs) | 7.11 REAR TURN SIGNAL LAMPS, Install |
| USB-C nut |
0.83–1.03 N·m (7.3–9.1 in-lbs) | 7.32 FRONT WIRE HARNESS, Install |
| Wire harness, main, lower caddy screws |
5–7 N·m (44–62 in-lbs) | 7.34 MAIN WIRE HARNESS, Install |
| Wire harness, rear, P-clamp screw |
5–7 N·m (44–62 in-lbs) | 7.33 REAR WIRE HARNESS, Install |