Activation consists of assigning two fobs to the system and entering an initial PIN.
NOTE
If the fob is lost or inoperable, the PIN allows the owner to disarm the system. See Electrical → PERSONAL IDENTIFICATION NUMBER (PIN).
  1. Configure the security system by assigning both fobs to the vehicle.
  2. Configure the security system by entering a PIN picked by the owner.
Record the PIN in the owner's manual. Instruct the customer to carry a copy (use the wallet card found in the owner's manual). See Electrical → PERSONAL IDENTIFICATION NUMBER (PIN).
Once the system has been activated, it "arms" within 5 seconds of switching the IGN switch to OFF and no motorcycle motion.