1. See Figure 2. Install tire TPMS valve stem assembly.
a. Install o-ring (2).
b. Install valve stem assembly (1) in wheel (6).
c. Install TPMS (3).
d. Install washer (4) and screw (5). Tighten.
Torque: 2.6–3 N·m (23–27 in-lbs) TPMS screw
2. Install tire. See Chassis → TIRES.
3. Install wheel bearing spacer (4) and new wheel bearings (1, 6). See Chassis → SEALED WHEEL BEARINGS.
NOTICE
Do not re-use brake disc/rotor screws. Re-using these screws can result in torque loss and damage to brake components. (00319c)
WARNING
Rotor mounting fasteners must be seated into drive bushings and drive bushings must be fitted into rotor properly. Failure to comply can affect braking ability and lead to brake failure which could result in death or serious injury. (00499b)
4. See Figure 1. Install front brake disc.
a. Align front brake disc (3) with mounting holes.
b. Install new brake disc screws (5).
c. Tighten screws in crosswise pattern.
Torque: 27–30 N·m (20–22 ft-lbs) Brake disc, front, screw
1Right wheel bearing
2Wheel and tire
3Front brake disc
4Wheel bearing spacer
5Brake disc screw
6Left wheel bearing (ABS encoder)
7Tire valve stem
Figure 1. Front Wheel Components
1Valve stem assembly
2O-ring
3TPMS
4Washer
5Screw
6Wheel
Figure 2. TPMS Valve Stem