1. See Figure 1. Install front brake caliper.
a. Install front brake caliper (4).
b. Install caliper mounting screws (3), do not tighten.
c. Apply brake pressure.
d. Tighten caliper mounting screws. Tighten.
Torque: 38–52 N·m (28–38 ft-lbs) Brake caliper, front, mounting screw
e. Release brake pressure.
2. If replacing caliper: Attach brake line.
a. Attach brake line (6) with banjo bleeder bolt (1) and new gasket washers (2).
b. Tighten banjo bolt.
Torque: 19–31 N·m (14–23 ft-lbs) Brake caliper, front, banjo bolt
1Banjo bolt
2Gasket washer (2)
3Caliper mounting screw (2)
4Front brake caliper
5Bleeder screw and cap
6Brake line
Figure 1. Front Brake Caliper