Left
1. See Figure 2. Install left hand grip (2).
2. Roll end of left hand grip back to access screw (3). Tighten.
Torque: 2.5–3.1 N·m (22–27 in-lbs) Left hand grip set screw
3. Install screw (1). Tighten.
Torque: 14–20 N·m (10–15 ft-lbs) Bar end screw, left
Right
1. See Figure 1. Install hand grip (1) with cosmetic features properly positioned.
a. Rotate to verify that internal splines are engaged with the twist grip sensor.
2. Install screw (2). Tighten.
Torque: 14–20 N·m (10–15 ft-lbs) Bar end screw, right
3. Install right hand control module. See Electrical → RIGHT HAND CONTROL MODULE (RHCM).
4. Install front brake master cylinder to handlebar. See Chassis → FRONT BRAKE MASTER CYLINDER.
1Right hand grip
2Bar end screw
Figure 1. Right Hand Grip
1Screw
2Left hand grip
3Screw
Figure 2. Left Hand Grip