1. If necessary, install AC Onboard Charger (OBC) in-line filter. See High-Voltage System → AC OBC IN-LINE FILTER.
2. See Figure 1. Connect connectors (5, 8) and position bottom pan (9).
3. Position ground strap (6). Install screw (4). Tighten.
Torque: 5–7 N·m (44–62 in-lbs) OBC filter ground strap screw
4. Install new wire tie (7).
5. Install bottom pan (9).
6. Install screws (1). Tighten.
Torque: 12.9–14.2 N·m (114–126 in-lbs) Bottom pan screws
1Screws (4) (2 on each side)
2Screws
3Bracket
4Screw
5OBC filter connector
6Ground strap
7Wire tie
8PEU connector
9Bottom pan
Figure 1. Bottom Pan