Remove
1. See Figure 1. Disconnect coolant pump connector (3).
2. Reposition hose clamps (5).
3. Remove coolant hoses (4).
4. Loosen screw (6), remove coolant pump assembly (1) from coolant pump bracket (2).
Install
NOTE
Make sure there is no debris in the pump inlet or outlet ports. Debris in coolant system could lead to overheating and motorcycle damage.
1. See Figure 1. Install coolant pump assembly (1) to coolant pump bracket (2).
2. Install screws (1). Tighten.
Torque: 5–7 N·m (44–62 in-lbs) Coolant pump screw
3. Install coolant hoses (4).
4. Move hose clamps (5) into position.
5. Connect coolant pump connector (3).
1Coolant hose (2)
2Hose clamp (2)
3Coolant pump connector
4Coolant pump bracket
5Coolant pump assembly
Figure 1. Coolant Pump