Prepare

1.

Drain coolant. See Cooling System → COOLANT.

Remove

1.	See Figure 1. Reposition clamp (1).
2.	Remove hose (2).

Install

1.	See Figure 1. Install hose (2).
2.	Reposition clamps (1).

1	Clamp (2)
2	Hose

Figure 1. Hose, PEU to Pump

PEU Outlet Pipe Fitting

Remove

NOTE

Do not replace fitting unless necessary.

1.	See Figure 2. Remove screws (3).
2.	Remove fitting (1).

Install

1.	See Figure 2. Inspect o-ring (1), replace as necessary.
2.	Apply light coating of coolant to o-ring, install fitting (2).
3.	Install screws (2). Tighten. Torque: 4.4–5.2 N·m (39–46 in-lbs) Coolant fitting screw, PEU outlet

1	O-ring
2	Coolant fitting
3	Screws (2)

Figure 2. Coolant Fitting, PEU to Pump

Complete

1.

Fill coolant. See Cooling System → COOLANT.