1.	See Figure 3. Install RHCM (1). a. Slide RHCM (1) onto handlebar (2). b. Position alignment pin (4) in hole (5). c. Tighten screw (3). Torque: 6.3–7.7 N·m (56–68 in-lbs) RHCM screw
2.	Install right hand grip. See Chassis → HAND GRIPS.
3.	See Figure 2. Connect connectors (2).
4.	See Figure 1. Install front housing (1). a. Align front housing (1) on RHCM. b. Install screws (2) until snug. c. Tighten RHCM housing screws. Torque: 0.6–0.9 N·m (5–8 in-lbs) Switch housing (RHCM) screws

1	Housing
2	Screws (2)

Figure 1. RHCM

1	RHCM
2	Connectors (2)

Figure 2. RHCM Connectors

1	RHCM
2	Handlebar
3	Screw
4	Alignment pin
5	Alignment hole

Figure 3. RHCM