| 1. | Route JSS wire as previously noted. | |
| 2. | See Figure 2. Install JSS (2). Secure with screw (1). Tighten. Torque: 2.2–2.8 N·m (19–25 in-lbs) JSS screw | |
| 3. | See Figure 1. Connect JSS connector (3) to harness connector (4). | |
| 4. | Install new fir tree cable strap (2). |
| 1 | JSS wire |
| 2 | Fir tree cable strap |
| 3 | JSS connector |
| 4 | Harness connector |
Figure 1. Jiffy Stand Sensor (JSS) Connector
| 1 | Screw |
| 2 | JSS |
| 3 | Jiffy stand |
Figure 2. Jiffy Stand Sensor (JSS)