Two-Up Seat Models
| 1. | See Figure 1. Position rear license plate bracket (3). | |
| 2. | If required install reflector (5) and nut (4). Tighten. Torque: 1.5–2 N·m (13–18 in-lbs) License plate bracket reflector nut | |
| 3. | Install new cable straps. |
| 1 | Cable straps (3) |
| 2 | Rear lighting bracket |
| 3 | Rear license plate bracket |
| 4 | Nut |
| 5 | Reflector |
Figure 1. Rear License Mounting Bracket Screw
One-Up Seat Models
| 1. | See Figure 2. Install rear license plate bracket (1). | |
| 2. | Remove screws (3). Tighten. Torque: 1.5–2 N·m (13–18 in-lbs) License plate bracket screw | |
| 3. | Install cable strap (4). |
| 1 | Rear license plate bracket |
| 2 | Rear lighting bracket |
| 3 | Screw (3) |
| 4 | Cable strap |
Figure 2. Rear License Plate Mounting Bracket (One-Up Seat Models)