Seat: Two-Up Seat Models
| 1. | See Figure 1. Install seat. a. Align seat (1) with seat tongue (5). b. Lower rear of seat until seat post (2) engages latch (3). |
Seat: One-Up Seat Models
| 1. | See Figure 2. Install seat. a. Align seat (1) with rear attachment (3). b. Lower seat into position. c. Install screws (1). tighten. Torque: 7–9 N·m (5–7 ft-lbs) Seat latch screws |
Seat Release Cable Assembly
| 1. | See Figure 3. Position assembly. Install screws (3). Tighten. Torque: 1.3–1.7 N·m (1.0–1.3 ft-lbs) Lock cylinder housing screws | |
| 2. | Install screws (1). Tighten. Torque: 5–6 N·m (3.7–4.4 ft-lbs) Seat latch screws | |
| 3. | Install seat release cable assembly into guides. |
| 1 | Seat |
| 2 | Seat post |
| 3 | Latch |
| 4 | Key cylinder |
| 5 | Seat tongue |
Figure 1. Seat
| 1 | Screw (2) |
| 2 | Seat |
| 3 | Rear attachment |
Figure 2. One-Up Seat
| 1 | Screws (2) |
| 2 | Latch |
| 3 | Screws (2) |
| 4 | Key cylinder |
| 5 | Cable guides |
Figure 3. Seat Latch, Cable Assembly and Lock Cylinder