1. See Figure 1. Install tail section (1).
2. Install screws (2), lower screws first. Tighten.
Torque: 25–29 N·m (18–21 ft-lbs) Tail section screws
1Tail section
2Screw (4)
Figure 1. Tail Section
Right Tail Section
1. See Figure 2. Install right tail section (1).
a. Install screws (3) and washers (2), lower screws first. Tighten.
Torque: 25–29 N·m (18–21 ft-lbs) Tail section screws
2. Install screws (4). Tighten.
Torque: 3.3–4 N·m (29–35 in-lbs) BCM caddy screws
1Tail section, right
2Washer (2)
3Screw (2)
4Screw (2)
Figure 2. Tail Section, Right
Left Tail Section
1. Install left tail section (2).
a. Install screws (4) and washers (5), lower screws first. Tighten.
Torque: 25–29 N·m (18–21 ft-lbs) Tail section screws
2. Install screws (3). Tighten.
Torque: 3.3–4 N·m (29–35 in-lbs) BCM caddy screws
3. See Figure 3. Install screw (1). Tighten.
Torque: 5–7 N·m (44–62 in-lbs) Charge port bracket screws
1Screw (2
2Tail section, left
3Screw (2)
4Screw (2)
5Washer (2)
Figure 3. Tail Section, Left
Rear Center Frame Section: One-Up Seat Models
1. See Figure 4. Install rear center frame.
2. Install screw (1). Tighten.
Torque: 5–7 N·m (44–62 in-lbs) Rear center frame screws
1Screw (6)
2Rear center frame
Figure 4. Rear Center Frame