NOTE

Apply in ambient temperatures between 21–38 °C (70–100 °F).
Parts cannot be repositioned after initial installation. Do not remove protective film from adhesive until ready to apply.
Do not bend emblem to fit contour of mounting surface.
Allow at least 24 hours after application before exposing the area to vigorous washing, strong water spray or extreme weather.
The adhesive bond will increase to maximum strength after about 72 hours at normal room temperature.

Test fit medallion.
1. Check medallion against curve of mounting surface.
2. Match left and right sides of fuel tank or top cover, as applicable.
Remove protective film from back of medallion.

NOTE