See Figure 1. Models with rider and passenger heated seats can be operated using the heated seat control on the left side of the seat.

Push rider (1) or passenger (2) button once to turn the desired seat position heat to high. Push again to change setting to low. Push again to shut heat off.

Press the all off (3) button at least 3 seconds to turn rider and passenger heated seats off.

The heated seat icon in the IFCU displays the heat setting. Refer to Table 1.

NOTE

If equipped: Heated passenger backrest is controlled by the passenger seat setting.

The heated seat is equipped with a thermostatic control to maintain a consistent and comfortable seating temperature. This feature ensures that the seat stays within the preset temperature range during use. To prevent battery drain, the heated seat is only operational while the engine is running.

NOTE

Certain environmental conditions, such as extreme ambient temperatures or sudden changes in surrounding temperature, may cause slight variations in the actual seat temperature. These fluctuations are normal and do not indicate a malfunction.

The sensor for thermostatic control is housed in both the rider and passenger seat. If the seat is not producing heat, see Troubleshooting → HEATED SEAT.

NOTE

Allow 8-10 minutes for the seat to warm up.

Table 1. Heated Seat Status Icons

ICON	Status
	Low
	High
	Off
	Alert

1	Rider control
2	Passenger control
3	All off

Figure 1. Heated Seat control