HomeLink garage door Opener

NOTE

Remote garage door opener function is not compatible with all garage door openers. Original brand garage door remote may be necessary for successful programming of the HomeLink.

See Figure 1. To access garage door opener functions, select HomeLink icon on IFCU.

See Figure 2. To add or remove garage doors, follow on screen prompts from HomeLink screen.

NOTE

To remove a garage door, it requires a long press on the existing garage door before directions are displayed.

Figure 1. HomeLink

Figure 2. HomeLink Main Screen

Operating Garage Doors

Garage Door 1 Only

To open or close garage door 1, flash the headlamp high beam or select Garage Door 1 on HomeLink screen. Refer to Operation → Left Hand Control Switches.

Additional Garage Doors

Additional garage doors can only be opened or closed by selecting the desired door on the HomeLink screen.

D-Mode Programming

When to use D-Mode: If your garage door opener (or other RF device) does not have a remote control, and instead uses a "Learn," "Program," or "Smart" button on the receiver, you'll likely need to use D-Mode.

1.	See Figure 3. Click OK to proceed.
2.	See Figure 4. Click Start and follow the on-screen instructions.

Figure 3. Proceed With D-Mode

Figure 4. D-Mode Instructions