WARNING
Identify and understand the specific features of your vehicle. Failure to understand how these features affect the vehicle’s operation can lead to an accident, which could result in death or serious injury. (00043b)
Before riding your motorcycle at any time, make a general inspection to be sure it is in safe riding condition.
WARNING
Stop the engine when refueling or servicing the fuel system. Do not smoke or allow open flame or sparks near gasoline. Gasoline is extremely flammable and highly explosive, which could result in death or serious injury. (00002a)
WARNING
Avoid spills. Slowly open fuel filler cap. Do not fill above bottom of filler neck insert, leaving air space for fuel expansion. Secure filler cap after refueling. Gasoline is extremely flammable and highly explosive, which could result in death or serious injury. (00028b)
WARNING
Use care when refueling. Pressurized air in fuel tank can force gasoline to escape through filler tube. Gasoline is extremely flammable and highly explosive, which could result in death or serious injury. (00029a)
NOTICE
Do not spill fuel onto the motorcycle while refueling. Immediately wipe up fuel spills on your motorcycle. Fuel can cause damage to cosmetic surfaces. (00147b)
1. Verify fuel is present in tank and add fuel if required.
2. Adjust mirrors to proper riding positions.
3. Verify oil is present in oil tank. Check oil level only after warming up the motorcycle.
4. Check controls to make sure they operate properly. Operate the front and rear brakes, throttle, clutch and shifter. All controls should operate freely without binding.
5. Check steering for proper operation by turning the handlebars through the full operating range. Handlebars should turn smoothly without binding.
WARNING
Be sure tires are properly inflated, balanced and have adequate tread. Inspect your tires regularly and see a Buell dealer for replacements. Riding with excessively worn, unbalanced or under-inflated tires can adversely affect stability and handling, which could result in death or serious injury. (00114a)
6. Check tire condition and pressure. Incorrect pressure will result in poor riding characteristics and can affect handling and stability.
7. Check all electrical equipment and switches including the headlamp, stop lamp, turn signals and horn, for proper operation.
NOTE
Check horn operation with engine running.
WARNING
Be sure headlamp, tail and stop lamp and turn signals are operating properly before riding. Poor visibility of rider to other motorists can result in death or serious injury. (00478b)
8. Check for any fuel, oil or hydraulic fluid leaks.
9. Check secondary belt for wear or damage. Service as necessary.