See Figure 2. Depending on its position, the Triple Tail™ can serve one of three functions, forward luggage rack, passenger backrest, or rearward luggage rack.
  1. See Figure 1. Use the thumb tab on the locking collar to snap the locking collar out of the locked position and rotate it to the fully open position.
  2. Press key into Triple Tail locking detent to release lock while pulling the Triple Tail toward the left hand grabrail out of the locking splines in the right hand grabrail.
  3. Rotate the Triple Tail to one of three positions.
  4. Push the Triple Tail toward the right hand grabrail until it engages the locking splines
  5. Verify that the Triple Tail is locked into position and rotate the locking collar to snap it back into its locked position.
  • The Triple Tail locking collar must be locked in position before operating the motorcycle.
  • Do not use the Triple Tail as a passenger seat in either the forward or rearward positions.
  • Maximum load capacity of the Triple Tail is 11 lbs (5 Kg).
  • See Operation → Tie Down Locations: Ulysses XB12X for tie down locations in the forward luggage rack or the rearward luggage rack positions.
Do not exceed luggage rack weight capacity. Too much weight can cause loss of control, which could result in death or serious injury. (00373a)
1Locking detent
2Locking collar
Figure 1. Triple Tail™ Locking Detent and Locking Collar
1Forward luggage rack
2Passenger backrest
3Rearward luggage rack
4Integrated tie down locations
Figure 2. Triple Tail™