Regular lubrication and maintenance will help keep your new Buell operating at peak performance. Your Buell dealer knows best how to service your motorcycle with factory approved methods and equipment assuring you of thorough and competent workmanship.

NOTE

Refer to Table 1. Regular maintenance interval operations are required to keep your new motorcycle warranty in force. The use of other than Buell approved parts and service procedures may void the warranty. Any alterations to the emission system components, such as the fuel and exhaust system, may be in violation of Federal and State laws.
Refer to Table 2. When servicing your motorcycle, bring this owner's manual to the dealership and complete the information needed in the blank columns listed.

WARNING

Perform the service and maintenance operations as indicated in the regular service interval table. Lack of regular maintenance at the recommended intervals can affect the safe operation of your motorcycle, which could result in death or serious injury. (00010a)

WARNING

If you operate your motorcycle under adverse conditions (severe cold, extreme heat, very dusty environment, very bad roads, through standing water, etc.), you should perform the regular maintenance intervals more frequently to ensure the safe operation of your motorcycle. Failure to maintain your motorcycle could result in death or serious injury. (00094a)

Table 1. Regular Service Intervals: 2010 Buell 1125 Models

ITEM SERVICED	PROCEDURE	620 mi 1000 km	6,200 mi 10,000 km	12,400 mi. 20,000 km	18,600 mi 30,000 km	24,800 mi 40,000 km	31,000 mi 50,000 km	37,200 mi 60,000 km	NOTES
Engine oil	Replace	X	X	X	X	X	X	X	1
Engine oil filter cartridge	Replace	X		X		X		X
Air cleaner	Replace filter element as required			X		X		X
Crankcase breather	Clean or replace			X		X		X
Tires	Check condition, check pressure and tread	X	X	X	X	X	X	X
Clutch fluid	Check level	X	X	X	X	X	X	X	3
Drive belt and sprocket	Inspect	X	X	X	X	X	X	X	2
Throttle, brake, clutch controls, sidestand	Inspect, service as required	X	X	X	X	X	X	X	2
Brake fluid	Check levels and condition	X	X	X	X	X	X	X	3
Brake pads and discs	Inspect for wear	X	X	X	X	X	X	X
Spark plugs	Replace			X		X		X	2
Electrical switches and equipment	Check operation	X	X	X	X	X	X	X
Front fork oil	Replace				X			X	2
Exhaust system	Inspect for leaks, cracks, and loose or missing fasteners or heat shields	X	X	X	X	X	X	X	5
Battery	Check battery and clean connections								5
Cooling system	Inspect level, check clamps for tightness	X	X	X	X	X	X	X	2
Coolant		Replace every 50,000 km (31000 mi)							2, 6
Radiators and oil cooler fins	Clean	X	X	X	X	X	X	X
Brake system and oil lines	Inspect for leaks, contact or abrasion.	X	X	X	X	X	X	X	2, 5
Critical fasteners	Check tightness			X		X		X	2
Valve lash	Measure			X		X		X	2, 4
Road test	Verify component and system functions	X	X	X	X	X	X	X
NOTES:	1. Perform annually or at specified interval, whichever comes first. 2. Should be performed by an authorized Buell dealer, unless you have the proper tools, service data and are mechanically qualified. 3. Change D.O.T. 4 fluid and flush brake and clutch systems every two (2) years. 4. Could vary with frequency of operation and riding style. 5. Perform annually. 6. Perform every two years or at specified interval, whichever comes first.

Table 2. Owner's Maintenance Records: Buell 1125 Models

SERVICE MILE INTERVAL	DATE	DEALER NUMBER	TECHNICIAN NAME	TECHNICIAN SIGNATURE
620 MI (1,000 KM)
6,200 MI (10,000 KM)
12,400 MI (20,000 KM)
18,600 MI (30,000 KM)
24,800 MI (40,000 KM)
31,000 MI (50,000 KM)
37,200 MI (60,000 KM)
43,400 MI (70,000 KM)
49,600 MI (80,000 KM)