| 1. | See Electrical → RIGHT HAND CONTROL MODULE (RHCM) → Install → RHCM. Remove housing (2). NOTE To replace the hand control module harnesses on internally wired handlebar, see Chassis → HANDLEBAR. a. See Electrical → RIGHT HAND CONTROL MODULE (RHCM) → Install → Hand Control Module (Typical). Loosen screws (5). b. Remove front housing (6). | |
| 2. | See Electrical → RIGHT HAND CONTROL MODULE (RHCM) → Install → RHCM Connectors. Remove connectors (1). NOTE The latches on connectors are fragile. Use care when disconnecting. a. Using a pick, carefully press connector latch (1) down. b. Use a prying motion on latch while pulling on connector to remove. | |
| 3. | Release connector latch (1) and rotate switch down. | |
| 4. | Remove hand control module. a. Remove hand control module from handlebar. b. Release wires from hand control module. c. Remove hand control module. |