Special Tools

Description	Part Number	Qty.
SHOCK ADJUSTMENT SPANNER	94448-82B	1
SPANNER WRENCH	HD-94700-52C	1

Adjust the shock absorber spring preload for the total load. Increase preload for heavy loads. Reduce preload for lighter loads.

WARNING

Adjust both shock absorbers equally. Improper adjustment can adversely affect stability and handling, which could result in death or serious injury. (00036b)

NOTICE

Do not turn the shock absorber adjustment collar clockwise beyond adjustment setting 5. Doing so may result in equipment damage. (00166b)

NOTE

Some models have a cover over the preload cam. Insert the teeth on the shock adjustment spanner into the holes in the cover.

See Figure 1. Using SHOCK ADJUSTMENT SPANNER (Part Number:94448-82B) or SPANNER WRENCH (Part Number:HD-94700-52C), turn the preload cam counterclockwise until it stops. Counting one at the stop position, turn the spanner clockwise and count each position to specification. Refer to Table 1 (FLD) or Table 2 (other models).

1	Preload cam cover
2	Spanner

Figure 1. Shock Absorber Preload Adjustment

Table 1. Recommended Shock Preload: FLD

LOAD¹	POSITION²
Less than 86 kg (190 lb)	1
86–109 kg (190–240 lb)	2
109–132 kg (240–290 lb)	3
132–154 kg (290–340 lb)	4
154 kg (340 lb) to maximum added weight allowed. Refer to Specifications → Specifications → Weight.	5
1. Passenger/Cargo: For every 16 kg (35 lb) of cargo or passenger weight, increase preload one position. Do not exceed the maximum added weight allowed. 2. See Controls and Indicators → Shock Absorber Preload: All except FXDLS → Shock Preload Cam Positions.

Table 2. Recommended Shock Preload: Dyna Models Except FLD

LOAD¹	POSITION²
LOAD¹	FXDF, FXDL	FXDWG, FXDB, FXDBC, FXDBP
Less than 60 kg (135 lb)	1	1
60–75 kg (135–165 lb)	1	2
75–89 kg (165–195 lb)	2	3
89–102 kg (195–225 lb)	3	4
102–116 kg (225–255 lb)	4	5
116 kg (255 lb) to maximum added weight allowed. Refer to Specifications → Specifications → Weight.	5	5
1. Add the weight of the rider, passenger, riding gear, accessories and cargo. 2. See Controls and Indicators → Shock Absorber Preload: All except FXDLS → Shock Preload Cam Positions.

Figure 2. Shock Preload Cam Positions