1. FXDLS: If necessary, remove the speed screen. See Maintenance and Lubrication → Speed Screen: FXDLS.
2. See Figure 1. Loosen horizontal adjusting bolt (2) to adjust headlamp beam side to side. Tighten bolt to 33.9–40.7 N·m (25–30 ft-lbs).
NOTE
FXDLS: Turn the handlebars full lock left to access the vertical adjustment bolt from the rear of the triple clamp.
3. Loosen nut on vertical adjusting bolt (1) to adjust headlamp beam up or down. Tighten bolt to 33.9–40.7 N·m (25–30 ft-lbs).
4. FXDLS: If removed, install the speed screen. See Maintenance and Lubrication → Speed Screen: FXDLS.
1Vertical adjusting bolt
2Horizontal adjusting bolt
Figure 1. Headlamp Adjustment: Except FLD, FLD103, FXDL, FXDL103