CAUTION
Do NOT pull on any electrical wires. Pulling on electrical wires may damage the internal conductor causing high resistance, which may result in minor or moderate injury. (00168a)
Disconnect spark plug cables from plugs by pulling on the molded connector caps. To reconnect, simply snap-on spark plug cables to tops of spark plugs.
Check spark plug type. Only use those spark plugs specified for your model motorcycle.
Check spark plug gap against table specifications.
Always tighten to the proper torque. Spark plugs must be tightened to the torque specified for proper heat transfer.
NOTE
If a torque wrench is not available, tighten plugs finger tight and then tighten an additional one quarter turn with a spark plug wrench.