The fork lock, saddlebags and Tour-Pak can be locked using the key, power lock fob or power lock switches in the fairing cap panel.
Key
See Controls and Indicators → Power Lock Fob Programming → Power Lock Fob. Use the key supplied with the vehicle to manually lock and unlock the fork lock switch, saddlebags and Tour-Pak.
Power Lock Fob
See Controls and Indicators → Power Lock Fob Programming → Power Lock Fob. The power lock fob remotely locks and unlocks the fork lock knob, saddlebags and Tour-Pak. The power lock fob can actuate the locks while the motorcycle is on or off.
  1. Close the saddlebag and Tour-Pak lids. Secure latches.
  2. If locking the forks, turn the handlebars to the full left position. Rotate the fork lock switch to the LOCKED position. Check that fork lock is engaged by pushing handlebars toward the right.
  3. Press the lock button on the power lock fob. The turn signals flash twice to indicate the vehicle is locked.
  4. To unlock, press the unlock button on the power lock fob. The turn signals flash once to indicate the vehicle is unlocked.
  5. Rotate the fork lock to the UNLOCKED position. Open saddlebags and Tour-Pak as needed.
NOTE
Rotate the fork lock switch to the locked position before pressing the lock button on the power lock fob. Rotating the switch after pressing the lock button will cause the forks to remain unlocked.
Power Lock Switches
See Controls and Indicators → Power Lock Fob Programming → Power Lock Switches. The power lock switch in the inner fairing cap activates the power locks in the fork lock switch, saddlebags and Tour-Pak.
The power lock switches only actuate the locks when the motorcycle is turned on. The OFF/RUN switch must be set to RUN or the motorcycle must be in accessory mode.
  1. Close saddlebag and Tour-Pak lids. Secure latches.
  2. If locking the forks, turn the handlebars to the full left position. Rotate the fork lock switch to the LOCKED position. Check that fork lock is engaged by pushing handlebars toward the right.
  3. To lock, push the OFF/RUN switch to RUN or hold the trigger switch to enter accessory mode. Press the lock switch in the fairing cap. The turn signals flash twice to indicate the vehicle is locked.
  4. To unlock, push the OFF/RUN switch to RUN or hold the trigger switch to enter accessory mode. Press the unlock switch in the fairing cap. The turn signals flash once to indicate the vehicle is unlocked.
  5. Rotate the fork lock to the UNLOCKED position. Open the saddlebags and Tour-Pak as needed.