Ride Modes
Refer to Table 1. The ride mode icon displays the currently selected ride mode. The selected ride mode can be changed using the mode button on the Right Hand Control Module (RHCM). Refer to Operation → Right Hand Control Switches.
Road: Delivers balanced performance with an intuitive blend of technology for daily use, with Anti-lock Braking System (ABS) and Traction Control System (TCS) intervention that offers peace of mind.
Rain: This mode offers restrained acceleration and limited engine braking with higher levels of ABS and traction control intervention to give the rider greater confidence when riding in the rain or when traction is otherwise limited. The Rain Mode is also an appropriate setting for riders to build confidence as they become familiar with the motorcycle.
Sport: Delivers the full performance potential of the motorcycle in a direct and precise manner, with full power and the quickest throttle response on tap. Traction control is set to its lowest level of intervention intended/appropriate for on-road use, and engine braking is increased. Sport Mode maximizes the rider connection to the motorcycle for a direct and visceral performance riding experience.
Custom Modes: Custom Modes allow the rider to select their own preference of engine torque delivery characteristics, engine braking, Throttle Response, TCS and ABS within specific ranges.
NOTE
Custom ride modes must be set up before they can be used. Refer to Infotainment Control Unit (IFCU) Operation → System Settings.
Table 1. Ride Modes
ICON
Ride Mode
Road
Rain
Sport
Custom A
Ride mode fault
Ride Mode Fault
Displays when system fault is detected by vehicle. When fault is detected, cycle ignition.
1. With security fob present, set the OFF/RUN switch to OFF.
2. Wait 45 seconds.
3. Set the OFF/RUN switch to ON.
If cycling ignition system does not eliminate fault, see a Harley-Davidson dealer for service.